Trailer PRONAR T028KM

Trailer PRONAR T028KM is a versatile product designed primarily for transporting bales, bales of straw or hay and also for transporting cargo on pallets. The most important innovation in the design of the bale trailer, unlike in previous models, are hydraulically lifted side walls to protect the transported cargo. Additionally, thanks to the possibility of fitting special stanchions on all sides of the trailer, a stable and secure transportation of logs, timber wood and other long materials is guaranteed. The large loading surface of ​​the trailer and its optimal load capacity makes it possible to transport a wide range of different materials and to use the trailer not only in agriculture.

  1. SAFE
    Possibility to use hydraulically raised and lowered side walls. Hydraulic walls provide a quick and safe securing of loads on the platform. By using hydraulically retractable arm, securing the bales of silage is done faster than by stringing them manually with straps. Loading of the trailer is carried out by hydraulically lowering one wall while the second wall is raised up securing the bales during loading. Trailer PRONAR T028KM in standard version is equipment with rear ramps protection in accordance to directive 70/221 / EEC and adjusted for fitting side underrun protection.
    Assembling the stanchions guarantee safety while transporting the timber wood, logs and other long materials. After disassembling the stanchions, empty sockets are covered with special rubber plugs that secure wrapped bales against damage.
    Allows the transportation of agricultural bales, square bales, euro pallets, boxes, in forestry sawn wood, wood logs, and various long materials as well as a wide variety of different materials including packed products used in construction, industrial, municipal, commercial, etc.
    Trailer PRONAR T028KM has a reinforced and more aesthetic loading platform with profiled side edges, so that the load is secured against sliding and wrapped bales and other cargo are protected against abrasion. Sides of the platforms and ladders are fitted with special holes for hooking belts. The dimensions of the platform and side edges allow loading EURO-pallets and pallets. Loading surface with adjustable rear frame allows to adjust the length of the surface to the transported materials, making it possible to transport materials with dimensions over 10 (7) meters. Optional stanchions are easily assembled with a single bolt, and after disassembling, the holes may be covered with a rubber plug.
    The loading platform is made of 3 mm thick, strengthened steel with only one central weld, so that the entire structure of the trailer is rigid and resistant to overload. The platform structure is not welded on the side edges what eliminates unnecessary corrosion. Reinforced axles are designed for the speed of 40 km / h. Chemically hardened painting materials provide durability and high resistance to corrosion and UV radiation.
    The trailer can optionally be equipped with a range of functional solutions, which allow users to customize the vehicle to their individual needs e.g. installing a tool box. Thanks to the usage of multiple solutions of braking systems, trailer PRONAR T028KM can be used with different tractors. The possibility of mounting a rear hitch enhances the functionality of the trailer. The use of winches with spare wheel under the frame of the trailer makes it easy to use the wheel in case of a breakdown what allows further driving.

Technical data
Version WITHOUT hydr. Side walls Version WITH hydr. side walls
Permissible total weight: 24000 [kg]
Load capacity: 18200 16900 [kg]
Empty weight: 5500 6950 [kg]
Loading space (rear frame folded/extended): 23,8/26,4 23,8 (folded only) [m 2]
Loading platform length (rear frame folded/extended): 9900/1100 9900 (folded only) [mm]
Loading platform width: 2470 2470 [mm]
Dimensions: length/width/height: 12000/2525/2900 * 12000/2545/3715 *** [mm]
13100/2525/2900 ** 12000/2945/4585 **** [mm]
Ladders height measured from the platform: 1790 2605 [mm]
Hydraulic side walls heigh:  – 2425 [mm]
Platform height, measured from the ground: 1110 [mm]
Platform thickness: 3 [mm]
Wheel track: 1960 [mm]
Suspension: parabolic springs
Tyres: 445/45R19,5
Maximum speed: 40 [km/h]
Tractor power requirement: 124,8/91,8 [HP/kW]
* rear frame folded with rear ladder 14°
** rear frame extended with rear ladder 14 °
*** side walls with transport position
**** siede walls with working position lifted to height 3000 mm above the floor
Standard equipment
Platform with profiles on the floor edges
Reinforced platform floor equipped with sockets for stanchions
Frame made of I-beams, open and closed rectangular profiles
Frame adjusted to the rear hitch mounting
Frame adjusted for mounting hydraulic sidewalls
Drawbar type: V- type rigid with towing eye ø40 mm
Steering: rotating turntable
Side ladders with adjustment of angle inclination suitable for transportaion round and square bales
Extendable rear frame with ladder increasing the loading space
Extendable rear frame supported by pin retainer
Holes for belt tightening on the platform side
Braking system: single line air or hydraulic
Crank hand brake
12V lightning system with rear electric socket and clearance lights
Rear underrun protection according to 70/221/EWG with lights and space for number plate
Rear electric socket
Wheel chocks and racks
Double-component chemically hardened painting materials, UV-resistant
Platform color: green RAL6010 PRONAR
Wheel chocks in galvanized pockets
Additional equipment (optional)
Hydraulic sidewalls with vertical ladders at the front and rear (loading length 9900mm)*
Front and rear posts (4 pcs on each side) for timber transportation, instead of front and rear ladders for bale transportation *
Front and rear posts (4 pcs on each side) + side posts ( 8 pcs on each side) for timber transportation, instead of front and rear ladders for bale transportation *
Front and rear posts (4 pcs on each side) + side posts ( 8 pcs on each side) for timber transportation, together with front and rear ladders for bale transportation *
Drawbar : Y type with ø40 fixed towing eye
Tool box
Hitch ORLANDI – IH380A4
Hitch ROCKINGER 400G145
Side underrun protection 89/297/EWG
Braking system: double line air with automatic (ALB)
Front and rear plastic mudguards with galvanized supports 4 pieces
Front and rear plastic mudguards with galvanized supports 8 pieces
Tyres 385/65R22,5 Reg
Tyres 385/65R22,5
Tyres 500/60R22,5
Tyres 560/45R22,5
Spare wheel 445/45R19.5 (seperately)
Spare wheel 385/65R22,5 REG. (seperately)
Spare wheel 385/65R22,5 (seperately)
Spare wheel 500/60R22,5 (seperately)
Spare wheel 560/45R22,5 (seperately)
Spare wheel winch unit
Warning triangle
Non standard colours according to RAL CALSSIC codes
* possibility to adjust the trailer with rear frame extension and ladders. No possibility to adjust the trailer with hydraulic sidewalls)
 1200 mm stanchions with hooks to attach transport belts, loading space between stanchions is 2324mm.