Disc mower PRONAR PDT260
Disc mower PRONAR PDT260 – central suspension which was used in the mower ensures an excellent operation on uneven and steep surface, clean and aesthetic cut and also optimum cutting height. Another advantage of this design is the three – step adjustment system of stay springs – 70, 80 or 90 kg which guarantees optimum pressure of the mower on the ground depending on the type of surface from soft soil, peat, up to the hard and dry. Extensive range of inclination (-16º to + 11º) facilitates operation on uneven and steep surface.
All components in direct contact with the ground are made of hardened boron steel.
Transporting the mower can take place in three different positions:
- vertically at the rear of the tractor;
- • vertically at the side of the tractor;
- • horizontally at the rear of the tractor.
This model has light but strong structure where high quality cutter bars made of materials with increased strength were used. Cutter bars were designed in PRONAR Department of Implementation and tested in highly demanding conditions. The results meet the requirements of even the most demanding farmers.
1EASY TO USEDue to the quick replacement of blades at the front and at the back of the cutter bar.
2DURABLEComponents in direct contact with the ground are made of hardened boron steel.
3COMFORTABLEGears with ground teeth that reduce noise.
4ERGONOMICThe right shape of discs ensures lower cutting resistance and power demand during cutting.
5UNIVERSALExtensive range of inclination facilitates enables operation on uneven and steep surface..
|Total width in working position||4500||mm|
|Total height in working position||1300||mm|
|Length in working position||1290||mm|
|Length in transport position min/max||1290/3990||mm|
|Width in transport position min/max||1430/1760||mm|
|Height in transport position min/max||1480/3320||mm|
|Swath width min/max||1200/1600||mm|
|Recommended working speed||10||km/h|
|Efficiency (for recommended working width)||2,6||ha/h|
|Min. power requirement||33/45||kW/HP|
|Linkage system||Cat. II and III acc. ISO 730-1|
|Number of disks (item)||6|
|Number of knives (item)||12|
|Type of cutting knives||twisted|
|The dimensions of the knives||120x49x4 Ø21||mm|
|Rotation speed of discs||3130||rpm/min|
|Ground following ability||+11/-16||[º]|
|vertically at the side of a tractor||hydraulically adjustable|
|vertically at the rear of a tractor||hydraulically adjustable|
|horizontally at the rear of a tractor||hydraulically adjustable ( recomennded for short transportation)|
|Required hydraulic output||One double-acting section and one double-acting section with floating position|
|Quick knifes replacement||Standard|
|Additional set of knifes||Standard|
|Spray RAL 6010 400 ml||Standard|
- Pronar tractors
- Green forage machinery
- Disc mower PRONAR PDK220
- Disc mower PRONAR PDT260
- Disc mower PRONAR PDT260C
- Disc mower PRONAR PDT300
- Disc mower PRONAR PDT300C
- Disc mower PRONAR PDT340
- Disc mower PRONAR PDF300
- Disc mower PRONAR PDF300C
- Disc mower PRONAR PDF301
- Disc mower PRONAR PDF301C
- Disc mower PRONAR PDF340
- Disc mower PRONAR PDF340C
- Disc mower PRONAR PDF390
- Disc mower PRONAR PDD830
- Disc mower PRONAR PDD830C
- Mulching mower PRONAR KPR500
- Rotary rakes
- Rotary tedders
- Bale wrappers
- Round balers
- Mixer feeders
- Front loaders & accessories