Disc mower PRONAR PDF300C
PRONAR PDF300C with a swath conditioner is a modern, built using the latest materials and technologies front mounted disc mower with excellent functional characteristics. It has a modern design, lightweight structure and a large 510 mm working width. PRONAR PDF300C offers optimum adjustment of contact with the ground – height of 270 mm and 240 mm below the working position. During mowing, the blade beam precisely follows even the largest irregularities of the ground. Inclination with regard to the ground is from + 70 to – 60. Such work of the suspension provides clean and aesthetic cut and the right cutting height.
To work with a tractor the mower should be equipped with front linkage and PTO and have (front) one hydraulic section.
PRONAR PDF 300C mowers are equipped with a standard tractor triangle hitch ( quick hitch) of category II and are mounted on the front three-point linkage of a 60/75 HP tractor.
PRONAR PDF 300C front mounted mower can be used together with PDD830 rear mounted mowers. The width of such a unit is 8,3 m.
-
1EASY TO USEDue to the quick replacement of blades at the front and at the back of the cutter bar.
-
2DURABLEComponents in direct contact with the ground are made of hardened boron steel.
-
3COMFORTABLEGears with ground teeth that reduce noise.
-
4ERGONOMICThe right shape of discs ensures lower cutting resistance and power demand during cutting.
-
5UNIVERSALExtensive range of inclination facilitates enables operation on uneven and steep surface..
| Total width in working position | 3550 | mm |
| Height in working position | 1280 | mm |
| Lenght in working positiony | 1820 | mm |
| Width in transport position ( raised side protections) min/max | 3200 | mm |
| Working width | 3000 | |
| Swath width min/max | 1500/2300 | mm |
| Recommended mowing speed | 10 | km/h |
| Min. power requirement | 55/75 | kW/HP |
| Efficiency ( for recommended working width) | 3 | ha/h |
| Tare weight | 1020 | kg |
| PTO speed | 1000 | rpm/min |
| Suspension | Front linkage cat. II acc. to ISO 730-1 | |
| Recommended working speed | 10 | km/h |
| Facilitation | Mechanical ( Springs) | |
| Number of disc | 7 | |
| Number of knives (item) | 14 | |
| left | 8 | |
| right | 6 | |
| Type of cuting knives | twisted | |
| Knives dimensions | 120x49x4 Ø21 | |
| Rotationspeed of discs | 3000 | rpm/min |
| Ground following ability | ||
| up | +7 | |
| down | -6 | |
| Transport position – horizontally at the front of the tractor | Raised on mowers cylinder and linkage | |
| Required hydraulic output | Hydraulic connection at the front of the tractor | |
| Swath conditioner drive | Belt gearbox | |
| Bellt size | SPB 1750 | |
| number of belts | 3 | |
| PTO shaft | Standard | |
| Additional set of knifes | Standard | |
| Spray RAL 6010 400 ml | Standard | |
Operating instructions