Trailer PRONAR T700M
PRONAR trailer T700M is a modernized version of the largest tandem trailer offered by Pronar. In this issue through the use of a new type of suspension and axles equipped with brakes for high load capacity, it permissible laden mass increased by 2 tons, up to 23 tons. New side wall design makes that center of gravity of container – in comparison with the previous version of the trailer – is lower. This fact clearly increases the stability of the trailer. In the tailgate is applied security system with locks on hydraulic cylinders, which guarantees locking without the possibility of an unexpected opening. Used rubber seal, ensuring a tight seal box during transport various cargoes. With all these innovations this trailer is the best equipped from all trailers in our offer.
-
1CAPACIOUSGVW 23 tons and 35,1 m3 of capacity.
-
2STABLE AT WORKLower center of gravity ensures safe use.
-
3SEALEDRubber seal allow to transport minor materials.
-
4HIGH QUALITY OF CONSTRUCTIONMade with maintaining strict quality standards.
-
5VERSATILITYHigh capacity and smooth crate enable transport all kinds of agricultural goods.
| Technical data* | ||
| Allowable total weight (technically): | 24000 | [kg] |
| Permissible total weight: | 23000 | [kg] |
| Load capacity: | 16090 | [kg] |
| Empty weight: | 6910 | [kg] |
| Load volume with extensions height 800mm (additional equipment) /without extensions (standard equipment): | 35(option) / 23 | [m 3] |
| Loading space: | 14,7 | [m 2] |
| Loading case inside lenght: | 6694 | [mm] |
| Loading case inside width: | 2242/2302 | [mm] |
| Dimensions: lenght/width/height: | 8500/2550/3750 | [mm] |
| Sidewall height: | 1500+800 | [mm] |
| Floor/wall thickness: | 4/4 | [mm] |
| Platform height, measured from the ground: | 1325 | [mm] |
| Wheel track: | 2100 | [mm] |
| Suspension: | parabolic springs | |
| Hitch-ring load: | 3000 | [kg] |
| Tyres: | 550/60-22,5 | |
| Maximum speed: | 40 | [km/h] |
| Tipping system: | 1-side | |
| Tipping cylinder (piston stroke/oil requirement/working pressure): | 2990mm/40L/200bar | |
| Tractor power requirement: | 136.7/100.5 | [hp/kW] |
| Tipping angle (backwards): | 55 | [˚] |
| * Technical data for trailer with extensions 800 mm | ||
| Standard equipment | ||
| Monocoque loading case with profiled walles and reinforced upper sidewalls edge | ||
| Hydraulically winched tailgate with automatic pressing system | ||
| Tipping frame made of hight strength steel with rectangular closed profiles | ||
| Tandem suspenssion with 4 parabolic springs with 1810 mm wheelbase with fixed axles equipped in drum brakes 406×140 | ||
| Axles for 60 km/h | ||
| Drawbar type: universal rigid amortized by steel leaf springs with height adjustment to couple with lower or upper hitch of the tractor | ||
| Drawbar hitch: rotary with Ø50 towing eye | ||
| Drawbar support: telescopic with 2-section gear | ||
| Braking system: double line air or single line air or hydraulic | ||
| Crank hand brake | ||
| Rear protective bumper homologated according to directive WE type, folded | ||
| Front and rear mudguards made of plastic and steel mudgards over the wheels | ||
| Wheel chocks + racks (2 pcs) | ||
| 12 V lighting system with rear electric socket | ||
| Rear lamps with protective grating | ||
| Tipping system: hydrauilc with automatic cut-off valve and thick safety steel cables | ||
| Mechanical support of the loading case | ||
| Hydraulic cables holder with a support for tractor connectors | ||
| Folded ladder and steps facilitating the access to the loading case | ||
| Open-work window on the front wall of the loading case | ||
| Grain hatch with lever in a rear wall | ||
| Double-component chemically hardened painting materials, UV-resistant | ||
| Tipping frame painting colour: red RAL3000 PRONAR | ||
| Loading case painting colour: green RAL 6010 PRONAR | ||
| Additional equipment (optional) | |
| Drawbar hitch: fixed with Ø40mm towing eye to couple with upper hitch of the tractor | |
| Drawbar hitch: fixed with Ø50mm towing eye to couple with lower hitch of the tractor | |
| Drawbar hitch: fixed ball-type K80mm to couple with lower hitch of the tractor | |
| Drawbar support: hydraulic straight with cut-off valve | |
| Drawbar support: hydraulic folded leg with cut-off valve | |
| Passively steered rear axle with hydraulic turning blockade | |
| Braking system: double line air with (ALB) | |
| Rear sockets for hydraulic installation and brakes for second trailer | |
| Sidewall extensions height 800mm made of steel 2mm thickness and open-work window on the front wall extension | |
| Operator’s platoform | |
| Tool box | |
| Side underrun protection | |
| Rolled canvas cover with frame and operator’s platform for walls extensions with height 800 mm | |
| Rear grain chute: | |
| Rear manual hitch, amortized | |
| Rear automatic hitch UNIMAR | |
| Rear automatic hitch RO*400A4600 | |
| Tyres 445/65R22,5 (18R22,5) | |
| Tyres 560/60 R22.5 – width of the trailer exceeds 2550mm | |
| Tyres 600/50 R22,5 – width of the trailer exceeds 2550mm | |
| Tyres 600/55-22,5 – width of the trailer exceeds 2550mm | |
| Tyres 600/55-26,5 – width of the trailer exceeds 2550mm | |
| Tyres 700/50-26.5 – width of the trailer exceeds 2550mm | |
| Tyres 800/45-26.5 – width of the trailer exceeds 2550mm | |
| Spare wheel (separately) 550/60-22,5 | |
| Spare wheel (separately) 445/65 R22.5 | |
| Spare wheel (separately) 560/60R22,5 | |
| Spare wheel (separately) 600/50 R22.5 | |
| Spare wheel (separately) 600/55-22.5 | |
| Spare wheel (separately) 600/55-26.5 | |
| Spare wheel (separately) 700/50-26.5 | |
| Spare wheel (separately) 800/45-26,5 | |
| Warning triangle | |
| Shock absorber for falling potatoes – three sets of rubber belts – 2,3m + 2,3m + 1,8m, mounted on the sidewall extensions (side extensions necessaary) | |
| Non standard colours according to RAL CALSSIC codes * | |
| * doesn’t aply fo units on stock |
BRUKSANVISNING Operating instructions Swedish