Double-rotor rake ZKP900D

Double-rotor rake ZKP900D – was created to meet needs of farms with large grassland areas.  Hydraulic regulation of working width varies from 7.1m to 9m, which results in high performance during raking. An important distinguish feature of machine is possibility to make one or two rollers ready to be picked up by baler or self-loading wagon. To not deform already made rollers, there is a possibility to lift the elements of the rake slightly above them without disconnecting rotor drivers, which makes work quicker.

ZKP900D can be used with tractors with a power of not less than 80KM (59kW) and not lighter than 2.5t. Connection with a tractor is made through three-point suspension system I or II cat. The width after folding doesn’t exceed 3m.

  1. Raking as required
    Hydraulically extending telescopic arms allows to rake grass into one or two rollers with width from 0.6 to 1.9m
  2. Smooth work on any ground
    Adjustable raking depth helps to set the optimum raking on varying soil hardness.
  3. Easy to maneuver in transport
    Dedicated hydraulic system allows the rotors to be smoothly folded into its transport position. The steering system is designed to make maneuvering on narrow and winding roads easier.

Technical specification of standard equipment
Total length in working/transport position 8600/8600 mm
Width in working position
minimum 7150 mm
maximum 9050 mm
Width in transport position 2800 mm
Height in working position 2350 mm
Height in transport position:
rakes off 3950 mm
rakes on 4650 mm
Number of raking swaths 1 or 2 pcs.
Working width 7100-9000 mm
Number of rotors 2 pcs.
Number of working arms 13 pcs.
Number of raking tines on one arm 4 pcs.
Suspension system Cat. I and II  in acc. with ISO 730-1
Turning wheel of the drawbar 2 turning wheels
Drive system for the rotors tandem type with 6 wheels
Type of rotary gear dry (lubrication with grease)
Overload protection WPT Single direction and overload protecting clutch 900 Nm.
Minimum power requirement 59/80 kW/HP
PTO speed 540 rpm
Empty weight 2820 kg
Recommended moving speed 10 km/h
drive system 10.0/75-15.3
rotors drive system 16×6.5-8 (6PR)
Tyres air pressure
   drive system: 400kPa
   rotors drive system 160kPa
Raking width adjustment hydraulic
Required hydraulic outputs One double-acting section and one double-acting section with floating position
Raising and lowering of rotors hydraulic and synchronized system
Additional equipment:
Wheels 340/55-16
Tine protection system
Tube for documents
  • Download PDF FileOperating instructions