Mixer feeder PRONAR VMP-5ST

Reliable mixer feeder PRONAR VMP-5ST  with a capacity of 5 m3 – is an ideal solution for cattle farms with a narrow cowshed with herd of 20-40 cows. Narrow cowshed is no longer a problem! Especially for these farms PRONAR prepared a version of the mixer wagon with rear and side windows. In case of lack of enough space at the side, dump of feed can be made at the back and the feed is collected manually. Mixing mechanism is characterized by low power demand. Four high quality divided cutting blades used in auger mixer guarantee long and failure-free operation. Weight of components, as well as the mixing time are displayed on a large, clearly readable digital display, with adjustable position both vertically and horizontally. Working well feed mixing wagon maximizes efficiency, reduces the time spend on feeding and increases milk yield of cows.

In the case of a higher entry to the cowshed a wall extension can be added which will enlarge the capacity to 6m3 (VMP-6ST). When enlarging the capacity, the auger mixer efficiency increases because of adding higher cutting blade.

  1. 1
    FOR NARROW COWSHED
    Rear and front window at the front right side.
  2. 2
    SOLID
    Profiled mixer-feeder tank characterized by high rigidity and resistance to abrasion or deformation.
  3. 3
    RELIABLE
    Italian gear Comer.
  4. 4
    PRECISE
    Equipped with 3-point weighing system.
  5. 5
    EFFICIENT
    Use of a auger mixer of the optimum shape reduces cutting time and mixing feed and also reduces the cost of preparing doses.

 

Permissible total weight: 3850 / 4500* [kg]
Load capacity: 1950 / 2350* [kg]
Empty weight: 1900 / 2150* [kg]
Container capacity: 5 / 6* [m 3]
Maximum length of container: 2990 [mm]
Maximum width of container: 2190 [mm]
Container height: 1430 / 1680* [mm]
Container floor diameter:: 1700 [mm]
Dimensions (Length/Width/Height): 3880/2190/2130 (2380*) [mm]
Container floor/sidewall/extensions thickness: 12/6 [mm]
Platform height, measured from the ground: 695 [mm]
Wheel track: 1500 [mm]
Suspension: fixed
Hitch-ring load: 845 / 990* [kg]
Tyres: 10.0/75-15.3
Construction speed: 15 [km/h]
Weighting system: 3-points
Feeding system:  2 windows, on the right hand side, at the front + at the back
Number of mixer rotations (PTO ratio 540 RPM): 33 [rpm]
Tractor power requirement: 55/40,5** (60/44**) [hp/kW]
* technical data for mixer feeder with extension 250 mm – VMP-6ST
* *minimal power requirements of the tractor’s PTO. The value depends on the physical properties of used components.

Standard equipment
Chassis frame: rectangular made of closed profiles
Profiled container with high stiffness
Drawbar: fixed to couple with lower hitch of the tractor
Drawbar towing hitch: rotary with ∅50 towing eye
Drawbar support: mechanical telescopic leg
Axle without brakes
Mixer type: high-efficiency 1 vertical auger
7 abrasion-resistant knives
Changeble cutting knives on the vertical mixer
Two counter knives manually regulated
Two discharge windows hydraulically driven (at the front on right side and at the rear)
Metal chutes below discharge window
Tarpaulin cover in lateral discharge window
Weight system with LCD to control the mixer and the loading weight
Operator’s platform with stairs on the both sides of the vehicle
Double-component chemically hardened painting materials, UV-resistant.
Movable upper protective rim
PTO shaft to connect with tractor
Chute and platform color: red RAL3000 PRONAR
Chassis and container color: green RAL6010 PRONAR
Wheel chocks + racks

Two additional levers for easier manual operation of counter knives
Spare wheel (separately) 10.0/75-15.3
Additional extensions 250mm (increasing capacity to 6 m3) *
Triangle for slow-moving vehicles
Paintwork RAL CLASSIC for industrial uses

* mixer feeder VMP-6ST

  • Download PDF FileOperating instructions

Agriculture machinery