Snowblowers PRONAR OW 2.1
Snowblowers PRONAR OW 2.1 are available with PTO drive (OW 2.1M) as well as hydralulic drive (OW 2.1H). This machines remove snow and ice from the road or other surfaces and throw away to the side for the distance up to 30 meters or onto a trailer. OW 2.1 snow blower can be installed on front or rear 3-point hitch. Discharge chute has hydraulically adjusted discharge angle and throwing distance. The blade and sliders are made of hardox steel.
-
1SIMPLE TO USEEasy to install and to control.
-
2ROBUSTSolid construction, rigid and light frame.
-
3COMFORTABLE TO USEDischarge chute hydraulically adjusted form operators cabin.
-
4PRECISE SNOW REMOVINGAdjustable throwing distance up to 30 meters.
| Snowblower PRONAR OW2.1M | ||
| Working width | 2,1 | m |
| Working height | 0,78 | m |
| Blowing distance | 5-30 | m |
| Efficiency | 10-12 | m³/min |
| Snail diameter | 340 | mm |
| Rotor diameter | 680 | mm |
| Mounting | 3pt hitch cat. II / III | |
| Power demand | 50-95 | HP |
| PTO range (on the front of the carrier, forward drive) | 540 left / 1000 right | rpm |
| PTO range (on the rear on the carrier, reverse drive) | 540 left | RPM |
| Weight | 650 | kg |
| Snowblower PRONAR OW2.1H | ||
| Working width | 2,1 | m |
| Working height | 0,78 | m |
| Blowing distance | 5-30 | m |
| Efficiency | 8-12 | m³/min |
| Snail diameter | 340 | mm |
| Rotor diameter | 680 | mm |
| Mounting | 3pt hitch cat. II / III | |
| Drive | hydraulic | |
| Oil demand | 100-140 l/min | |
| Nominal pressure | 250 bar | |
| Weight | 737 | kg |
Additional equipment:
Snowblower PRONAR OW2.1M
Joint- telescopic shaft
Extended discharge chute
Side extensions (right 20cm, left 15)
Set of power cables
Snowblower PRONAR OW2.1H
Power cables (for Pronar machinery)
Power cables (different lenght)
Extended chute
Side extensions (right 20cm, left 15)
Operating instructions