Mixer feeder PRONAR VMP-10
The machine, which works 365 days a year needs to be reliable. Mixer feeder PRONAR VMP-10 with a capacity of 10 m3 – is an ideal solution for cattle farms with a herd of 50-60 cows. Mixing mechanism is characterized by low power demand. Optimally shaped auger mixer shortens the feed cutting and mixing time to minimum. Removable and adjustable cutting blades and two mechanically operated counter blades guarantee long and failure-free operation. 4-point weighing system with LCD display allows to accurately dispense the ingredients and portions for individual cattle. Working well feed mixing wagon maximizes efficiency, reduces the time spend on feeding and increases milk yield of cows.
-
1FUNCTIONALReduces the operating time of the tractor, saves time and fuel.
-
2SOLIDProfiled mixer-feeder tank characterized by high rigidity and resistance to abrasion or deformation.
-
3RELIABLEItalian gear Comer.
-
4PRECISEEquipped with 4-point weighing system.
-
5EFFICIENTUse of a auger mixer of the optimum shape reduces cutting time and mixing feed and also reduces the cost of preparing doses.
-
6UNIVERSALBy removing or adding a wall extension we can reduce or enlarge the volume by 2m3
| Permissible total weight: | 7700 | [kg] |
| Load capacity: | 4000 | [kg] |
| Empty weight: | 3700 | [kg] |
| Container capacity: | 10* | [m 3] |
| Container loading surface | 7.1 | [m 2] |
| Maximum length of container: | 3530 | [mm] |
| Maximum width of container: | 2490 | [mm] |
| Container height: | 1588** | [mm] |
| Container floor diameter:: | 1960 | [mm] |
| Dimensions (Length/Width/Height) | 4860/2550/2670 | [mm] |
| Container floor/sidewall/extensions thickness: | 20/8/8 | [mm] |
| Platform height, measured from the ground: | 820 | [mm] |
| Wheel track: | 1700 | [mm] |
| Suspension: | fixed | |
| Hitch-ring load: | 1300 | [kg] |
| Tyres: | 30×11.5-14.5 RE | |
| Construction speed: | 25 | [km/h] |
| Weighting system: | 4-points | |
| Feeding system: | 2 windows on the sides symmetrically located | |
| Number of mixer rotations (PTO ratio 540 RPM): | 25,6 | [rpm] |
| Tractor power requirement: | 65/47,8 | [hp/kW] |
| * Container capacity with extension 250mm | ||
| ** Internal height of the container without extension | ||
Standard equipment
Chassis frame: rectangular made of closed profiles
Profiled container of high stiffness
Drawbar: fixed to couple with lower hitch of the tractor
Drawbar towing hitch: rotary with ∅50 towing eye
Drawbar support: mechanical telescopic leg
Braking system: single or double line pneumatic or hydraulic
Crank hand brake
Lighting system
Mixer type: 1 vertical auger
Changeble cutting knives on the vertical mixer:
3 abrasion-resisitant knives made of chrome-vanadium-wolfram placed on the floor
6 abrasion-resisitant knives made of chrome-vanadium placed on the sidewalls
Cutting knives adjustable in 3 positions
Two counter-knives manually regulated
Two discharge windows hydraulically driven
Mixer drive 540min-1, with gearcase, number of mixer rotations 25,6min-1
Adjustable chutes under the windows
Rubber protections in discharge windows
Weighting system with LCD to control the mixer and the loading weight
Operator’s platform with stairs on the both sides of the mixer feeder
Double-component chemically hardened painting materials, UV-resistant.
Upper protection rim
Wheel chocks + racks
Chute and platform color: red RAL3000 PRONAR
Chassis and container color: green RAL6010 PRONAR
Drawbar: fixed with towing eye for upper hitch of the tracotr
Drawbar towing hitch: fixed with towing eye Ø40
PTO shaft
Sidewall extensions 250mm (increasing capacity to 12m^3)
PTO shaft with gearcase
Without extensions 250mm (decreasing capacity to 8m^3)
Additional two levers for easier manual operation of counter knives
Spare wheel (separately) 30×11.5-14.5 RE
Without lighting system
Without double line pneumatic braking system; with over run brake
Warning triangle
Special auger drive, 540min-1, with II-gear gearcase, auger rpms 33min-1 – on I gear, 17min-1 – on II gear
Operating instructions