Sweeper PRONAR ZM-2300M

The newest ZM-2300M sweeper is designed for removal of dirt from city streets, sidewalks, squares, parking lots, other paved areas and roads . It can also be used in the winter for clearing snow. Construction of the sweeper, its features and functionality make ZM- 2300M a perfect choice for municipal companies and industrial plants, supermarkets, housing estates. The possibility of aggregation to tractors or loaders make it a good machine for agriculture, horticulture and the private sector.

ZM-2300M is a hydraulically driven attachable appliance designer for mounting on the front of carrying vehicle. Extensive range of accessories allows the sweeper to be adapted to individual customer needs.

Sweeper PRONAR ZM-2300M- features:

Sweeper ZM-2300M

  1. JACK-SCREW
    The jack-screw allows changing the frame height above the ground as the brush wears out. The stepless height adjustment of the sweeping roller provides efficient sweeping and maximises brush lifespan.
  2. CYLINDRIC BRUSH
    Thanks to a segment construction, the 650mm – diameter cylindric brush is available in a number of possibile types of wreaths: simple wreaths (with by spacer rings) bent wreaths (forming a honeycomb structures) or wreaths with bristles studded into plastic rings. This, combined with various bristle materials – propylene (PPN) – through metal wire (straight or bent) – to a mixture of these materials, gives you the ability to match the machine model to the specific needs of the buyer. The roller brush is driven by a powerful hydraulic motor, built inside the shaft, which eliminates the risk of damage by hitting an obstacle, and also reduces the width of the machine to 2.55 m.
  3. HEIGHT AND POSITION MARKER
    The special design of the suspension system allows the sweeper to traverse up and down. Additionally it has an angular displacement in two planes, making it perfectly copies the area. The use of indicators visible to the operator, which show the position of the machine with respect to the carrier, reduces the risk of damage. This can occur when working with large tractors or wheel loaders on uneven terrain or when crossing obstacles (eg. Speed humps).
  4. FRONT AND REAR SUPPORTING WHEEL
    The machine uses wheel sets designed to carry heavy loads and work in harsh conditions. The kit is composed of a full wheel made of elastic rubber (250mm diameter and 80 mm thickness and a very durable casing ).
  5. TURNING REGULATOR
    The sweeper comes in standard with a manual turning lock, allowing you to change the approach angule of the machine by 25 ° – clockwise and anti-clockwise. The angle changes allows sweeping-out waste to the right or left side. On request, the manual lock may be replaced by a hydraulic cylinder, which provides stepless regulation in the same range.
  6. RIGHT AND LEFT SIDE BRUSH
    An important function, from the point of view of the user, is sweeping out waste from curbs or wall sides. This operation requires use of side brush (disc). The ZM-2300M sweeper can be equipped with right, left or both brushes (available as options). One side brush (600 mm diameter) increases the machine’s working width up to 0.4 meters. It can be hidden in the sweeper’s outline for transportation. It can be also raised and locked in the upright position. Each side brush can be independently switched on and its speed can be adjusted independently.
  7. TILTING WASTE TANK
    Another very useful piece of equipment is extra large waste tank with a capacity of about 480 liters. It is provided with a central support wheel and a hydraulic actuator for rotating it to dispose of accumulated waste. The space between the container and the ground is sealed by an elastic belt with hardwearing material. Tilting the bottom makes it easy to drive over obstacles while sweeping eg. Speed bumps.
  8. SPRINKLER SYSTEM
    Sprinkler system may be mounted as additional equipment. Its main element is a water tank with a capacity of about 310 liters, formed in rotomuolding technology, which shapes harmonizes with the appearance of the machine. Nozzles are placed behind the roller brush and side brushes (if they have been fitted). Its main task is dust reduction during operation.
  9. UNIVERSAL FITTING FRAME
    Universal fitting frame allows aggregation with a full range of carrying vehicles e.g. tractors, loaders, forklifts etc.

Zapisz

Zapisz

Zapisz

Zapisz

Zapisz

Zapisz

Mounting 3-pt hitch cat. II and III
Main brush drive (medium hardness) Hydraulic engine
Emptying dirt container Hydraulic
Working width 2525-2795  mm
Waste container capacity 470  dm3
Working oil pressure 160  MPa
Brushing roller recommended speed 100-150  rpm
Brushing roller max. speed 195  rpm
Recommended brushing speed 6  km/h
Efficiency for recommended speed 13800-19200  m2/h
Weight 740-1060  kg

Without waste container
2 side brushes
Left side brush
Right side brush
Sprinkler system
Hydraulic turning mechanism
Hydraulic instalation for oilflow over 90l/min
Other mounting frames
Main brush -soft
Main brush -hard
Main brush – very hardhard
Side brush – soft
Side brush – hard

  • Download PDF FileOperating instructions